System Controls
Features:
- Total System Control
- Maximum System Reliability
- Enhanced Productivity
- Unsurpassed Energy Efficiency
 ISM** -- The Intellisys System Manager is capable of controlling up to four (4) rotary screw or reciprocating compressors. The ISM will load or unload compressors as necessary to maintain line pressure within the upper and lower operational pressure setpoints (minimum span of 3 PSI between the two setpoints). The pressure is sensed via a single point in the system. This is not a cascading pressure control scheme. The compressor sequences can be changed automatically on the basis of elapsed time. In the unlikely event of an ISM or communication failure the affected compressor(s) will default to local control and settings. This will provide the maximum protection to the customer’s air system. [**For multiple compressor control systems, please contact us.]
| CCN |
Suggested Sell |
| 22194732 |
$1,895 |
Intellisys System Manager Features:
ENHANCE RELIABILITY
Control up to 4 rotary screw or reciprocating compressors from ANY manufacturer
Balance running hours on all compressors
SAVE ENERGY
Overcome the problems associated with compressor trains
Eliminate cascading and reduce the control pressure band
INCREASE PRODUCTIVITY - Automate compressor control
 PacE -- Installing a PacE unit will be the best decision you can make. Storing air at high pressure is good working practice. The higher your stored pressure, the more volume you will have in your tank to meet peak system demands. But letting high pressure air into your system is the worst thing you can do. PacE prevents high-pressure air from entering into your system, providing protection for all your down stream production equipment. Over pressurizing tools and pneumatic components greatly reduces their life expectancy and leads to malfunction, costly repair and or replacement. In addition to protecting your equipment, PacE will reduce your energy costs and provide valuable extra capacity from your air compressor.
| Model |
CCN |
Max CFM |
NPT |
Max Inlet
Pressure
|
Control Range |
Max Operating Temp |
Suggested Sell |
| PacE I |
38334314 |
250 |
1” |
232 |
144 psig - 7 psig |
176°F (80°C) to
-4°F (-20°C)
|
$440 |
| PacE .5 |
38342119 |
60 |
.5” |
232 |
$293 |
PacE Features:
Energy savings – 7% for every 14psi reduction in system pressure
Single point system control
Protection for all downstream equipment
Prolonged compressor and equipment life
Simple installation and operation
  Alternator Switch
The Alternator Switch is designed to control any (2) pressure switch controlled reciprocating air compressors. This robust unit that is rated to 600V provides alternating and duplexing functionality at a superb value.
| CCN |
Suggested Sell |
| 38342176 |
$750 |
CONTACT US ABOUT THESE OTHER SYSTEM CONTROLS:
 Intellisys Energy Optimizer
ENHANCE RELIABILITY
Control up to 8 rotary screw or reciprocating compressors from ANY manufacturer
Continuous monitoring of system air quality
SAVE ENERGY
Overcome the problems associated with compressor trains
Eliminate cascading and reduce the control pressure band
Optimize Ingersoll-Rand’s NIRVANA compressor in a system
INCREASE PRODUCTIVITY
Automate compressor control
Real-time clock gives the user the power to optimize compressor scheduling to meet varying plant demands
Air System Controller
The Air System Controller (ASC) provides a window into the compressor room by making the raw data available to plant operators and managers in formats that are easy to understand plus provide substantial ENERGY SAVINGS. The ASC utilizes a Machine Interface (HMI) Software specifically designed by Ingersoll-Rand for Compressed Air Systems. [Please contact us for system requirements.] Functions include:
Total System Control & Remote Monitoring
Total System Control (compressors, dryers, cooling towers, pumps, etc.)
Mixed Compressor Technology (rotary, reciprocating or centrifugal)
Unlimited number of components
Enhanced Communications (LAN, internet, multiple PC)
Air System Manager
The Air System Manager (ASM) provides a window into the compressor room by making the raw data available to plant operators and managers in formats that are easy to understand plus provide substantial ENERGY SAVINGS. The ASM utilizes an "off-the-shelf" Machine Interface (HMI) Software which is specifically customized for Compressed Air Systems. [Please contact us for system requirements.]
Functions include: Total System Control and Remote Monitoring
Total System Control (compressors, dryers, cooling towers, pumps, etc.)
Mixed Compressor Technology (rotary, reciprocating or centrifugal)
Unlimited number of components
Custom Graphics and control
4-Logic Controller
Logic Compressor Control enables you to operate up to four (4) compressors in the most efficient way possible. Via a single pressure transducer mounted in your air system, a signal is sent to the 4Logic controller, which will sequence machines to perfectly match your systems demand for air. This will minimize running costs and equalize the loading on each compressor.
Rotary or Reciprocating control methodology
24/7 time clock set (stop/start time)
By-Pass control
In the event of control system power loss - revert to local compressor control
Security lockout – (tamper proof keypad)
Simple installation & set up
80-hour battery backup in the event of a power failure
Will work with any pressure switch controlled machines. (110/240V 50-60hz-control voltage)
|
|
Copyright
OEM Air Compressor. All Rights Reserved. |