|
Sullivan Palatek UD Series - 60Hz - 40, 50, 60 HP Rotary Screw Air Compressors
UD Series Air Compressors from Sullivan Palatek offer a compact design, direct drive, C-face flange mount positive alignment, and 5-year air end warranty
- Electric Motor: 230/460 volt (40-60 H.P.), Nema T-frame, C-face, open drip proof squirrel cage induction type.
- Motor Starter: 460 volt (40-60 H.P.), full voltage magnetic starter with 110 volt controls, Nema-1 enclosure, ETL listed and three phase overload with external reset and phase protection. Control circuit breaker protection. Other voltages available. Cooling fan protected by overload relay.
- Separator Tank: ASME coded 200 PSIG tank, relief valve, minimum pressure/check valve, high efficiency replaceable oil separator element.
- Fluid Fill & Level Elbow: One piece fluid fill elbow and level sight glass. Vented cap for pressure release when filling.
- Protective Devices: Class 20 overload relay, high temperature and over pressure shutdown switches, and anti-restart pressure switch preventing starting while air compressor is pressurized. Anti-reversing control standard.
- Cooling System: Cooling system with own motor. Large side by side oil cooler/aftercooler. Updraft for maximum efficiency. Easy cleaning.
- HD Air Intake Filter: Oversized dry type, single stage with replaceable element
- Inlet Valve: One piece housing for dependable performance and full modulation.
- Coupling & Drive: Compressor is flange mounted to motor C-face for positive alignment and direct driven by zero maintenance coupling.
- Controls: Full modulation, solenoid controlled for smooth lowest possible no load power. Automatic start/stop or constant speed. Timed dual control.
- Instrumentation: Line pressure gauge, discharge pressure gauge, hour meter, temperature gauge, oil filter and separator element differential gauges.
- Oil Filter: Spin on type mounted direct to compressor unit for ease of maintenance and streamlined tubing.
- Microprocessor Control.
- Auto/Dual Control: Compressor control that allows the unit to be operated in continuous run mode or with an automatic timed shut down. Auto control allows multiple machines to be operated in a lead-lag condition.
- Air Cooled Aftercooler: Double pass air-cooled aftercooler with thermostatic control for maintaining the appropriate oil operating temperature and reducing the discharge air temperature to within 15 degrees of ambient.
UD Series - 60Hz
|
|
Each compressor package comes standard with 230/460/575/3-60 ODP electric motor, air-cooled after-cooler to reduce discharge air temperatures, full voltage motor starter mounted and wired (wired for 230-3-60 voltage standard), dual control (AS&S and constant speed control), low sound/ full sheet metal enclosure, package pre-filter, 9000-hour rated Ultra Plus coolant, spin-on oil filter and separator element, A.S.M.E. coded horizontal receiver tank (tank mounted units only) with manual drain, and NEMA-1 electrical protection.
|
UD Series: Model 40, 50, & 60HP
|
Base Mount |
Base Mount Enclosed |
|
| Model |
HP |
ACFM |
Max PSI |
dBA |
Suggested
Sell |
Suggested
Sell |
Shipping
Weight
(lbs.)
|
| 40UD |
40 |
166 |
125 |
90 |
$14,912 |
$17,688 |
na |
| H40UD |
40 |
115
|
150 |
90 |
$15,104 |
$17,879 |
na |
| HH40UD |
40 |
110 |
175 |
90
|
$15,170 |
$17,944 |
na |
| 50UD |
50
|
210 |
125 |
90
|
$17,281 |
$20,056
|
na |
| H50UD |
50 |
200 |
155 |
90 |
$17,471 |
$20,248 |
na |
| HH50UD |
50 |
160 |
175 |
90 |
$17,537 |
$20,312 |
na |
| 60UD |
60 |
280 |
125 |
90
|
$21,474
|
$24,248
|
na |
| HH60UD |
60 |
225 |
175 |
90 |
$24,243 |
$27,016
|
na |
|
|
|
|